inkAID Iridescent Pearl Gloss Precoat 473ml (16oz)
![inkAID](/images/brands/brand403.jpg)
Item: 26997
Apply an iridescent-type pearl photo to papers, canvas, fabric, leather etc
In stock
Item: 26997
Apply an iridescent-type pearl photo to papers, canvas, fabric, leather etc
In stock
InkAID Iridescent Pearl inkjet receptive coating can be applied to various substrates, allowing you to print on virtually any material that can go through your inkjet printer.
They provide a glowing, reflective, iridescent surface that enhances the colour of the ink, which changes slightly as you adjust your viewing angle.
The prints are clear and crisp, with vibrant colours and deep blacks. Coating onto aluminium or dark paper can produce an especially desirable visual effect.
Generally, all inkAID Iridescent Coatings have good adhesion to smooth, non-porous surfaces like metals and can be applied to paper, wood, fabric, and canvas. They are not water resistant but provide a beautiful background to print onto.
Working with inkAID Iridescent Coatings
Stir inkAID Iridescents gently but thoroughly from the bottom before using.
Either foam or bristle brushes can be used to apply the coatings. Brush the Inkjet coating onto the surface in even strokes, covering the entire substrate. The sheet is ready for printing when the layer has dried to the touch.
Start with small test pieces to adjust your colour settings and printing profiles. Use ""semi-gloss or enhanced matte"" paper settings as a starting point.
Allow the paint to dry for a day before applying any top coating.
There is a range of inkAID Iridescent Inkjet Receptive coatings; you can find them all in a Sample Set and choose the one required for your specific application. You can even mix the different colour coatings to create your unique blends! In the Sample Set, you get 4-ounce bottles, which provide enough layers to coat two or three 8 x 10-inch sheets.